Product Care Guide

🧼 How to Wash a Paracord Dog Collar or Lead

(Hand wash only – do not machine wash)

Paracord collars and leads are durable, but the whipping detail and decorative elements can loosen or fray in a washing machine. Hand washing is always recommended.

What You’ll Need:

  • A bowl or sink

  • Warm water (not hot)

  • Mild dish soap or gentle hand soap

  • Soft brush or old toothbrush

  • Clean towel

  • Drying rack or flat surface

Step-by-Step Instructions:

1️⃣ Remove Hardware Attachments (If Possible)

If your collar or lead has removable tags or charms, take them off before washing.

2️⃣ Prepare Warm Soapy Water

Fill a bowl or sink with warm water and add a small amount of mild soap.
Mix until slightly sudsy.

Avoid harsh detergents or bleach, as these can weaken fibres.

3️⃣ Soak

Submerge the collar or lead in the soapy water and allow it to soak for 10–15 minutes.
This helps loosen dirt, oils, and debris trapped in the weave.

4️⃣ Gently Scrub

Using a soft brush or toothbrush, gently scrub:

  • High-contact areas

  • Between woven sections

  • Around buckles and clips

  • Near whipping detail (be gentle here)

Avoid pulling or stretching the cord.

5️⃣ Rinse Thoroughly

Rinse under clean, warm running water until all soap residue is removed.
Soap left behind can make the fibres stiff once dry.

6️⃣ Remove Excess Water

Gently press the collar or lead between your hands or inside a towel to absorb excess water.

Do not wring or twist, as this can distort the weave.

7️⃣ Air Dry Properly

Lay flat on a clean towel or hang in a well-ventilated area.

  • Keep away from direct heat sources (radiators, tumble dryers)

  • Avoid prolonged direct sunlight, which may fade colours

  • Allow to dry completely before use (usually 24 hours)

⚠️ Important:
We do not recommend placing paracord collars or leads in the washing machine due to the whipping detailing and woven construction, which can loosen, fray, or become damaged.

🧼 How to Wash a Biothane Dog Collar

(Hand wash recommended)

Biothane is waterproof and easy to clean, making maintenance simple.

What You’ll Need:

  • Warm water

  • Mild soap

  • Soft cloth or sponge

  • Towel

Step-by-Step Instructions:

1️⃣ Rinse Off Surface Dirt

Run the collar under warm water to remove mud or loose debris.

2️⃣ Wash with Soap

Apply a small amount of mild soap to a cloth or sponge and wipe down:

  • The full length of the collar

  • Around hardware and buckle areas

  • Inside edges where dirt can build up

3️⃣ Rinse Thoroughly

Rinse under warm water until all soap residue is removed.

4️⃣ Dry Completely

Biothane does not absorb water, so drying is quick:

  • Pat dry with a towel

  • Or leave to air dry in a well-ventilated area

Avoid direct heat sources.

🐾 General Care Tips

  • Clean after exposure to saltwater or heavy mud.

  • Store fully dry to prevent odour or hardware corrosion.

  • Regular light cleaning prevents deep staining.

  • Check hardware and stitching during cleaning for wear.

Shop Now